Evapo-Rust

If you have metal tools, corrosion is a fact of life. You can take steps to limit moisture and apply protective coatings but like ants at a picnic, rust is all but inevitable.

There are lots of ways to remove rust — scraping, sanding, caustic baths. All of these are effective but they also tend to remove paint finishes or alter the metal surface. It’s easy to sand off the etched markings on a knife or saw blade along with the rust.

Lately I’ve been experimenting with a new (to me) product called Evapo-Rust. You can also find it sold as Metal Rescue. So far as I can tell they’re the same product. I bought a gallon of it from an auto parts store for a little over $20.

According to the MSDS, the product is fairly benign. Don’t drink it but otherwise it’s fairly harmless. The MSDS also says its safe for the environment. A good thing because despite the promises made when I was a kid, it’s the 21st century and I still don’t have a flying car or a realistic prospect of moving to another planet.

Before-2

Before CleaningBefore-1

The first item I tried de-rusting is a Sargent fillister plane sold by Sears under the Craftsman name. Most of the machined surfaces showed light surface rust. It was also rusting where the finish was chipped.

After disassembling the plane, I scrubbed all the parts with Simple Green and a toothbrush followed by a rinse in clear water. The parts(*) went in the Evapo-Rust for two hours — parts that lay flat on the bottom were turned over after an hour. At the end of two hours, the parts were removed, scrubbed with a toothbrush under running water, dried and given a couple coats of paste wax.

After-2

After CleaningAfter-1

The results are pretty amazing. The rust is gone and the finish along with the original surface machining is still there. All it needs to go back into service is a sharp blade.

(*) The lever screws, spur screw and fence rod are blued. To preserve the finish I cleaned those with 0000 steel wool.

Advertisements
This entry was posted in Woodworking Tools and tagged , , , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s